D.I.Y. - Plasti Dipping Wheels / Rims - By Richard DeFries

D.I.Y. - Plasti Dipping Wheels / Rims

1. Gather Your Tools - Jack - Jack Stands 2 Or 4 - 1/2 Drive Ratchet - Breaker Bar - Impact - 19 MM Socket - Degreaser / Cleaner - Index Cards - Plasti Dip Of Choice - Rags

2. Park Your Car . Engage Your Parking Brake / E - Brake . Chuck Your Rear Wheels . ! Safety First !

3.. If You Have 2 Jack Stands Start From The Front And Remove Both Front Wheels / Rims - If You Have 4 Jack Stands Remove All Wheels / Rims (19 MM Socket) Either Use Impact Or 1/2 Drive Ratchet And Breaker Bar

4. Prep Your Plasti Dip Surface And Clean With a Degreaser / Cleaner And Allow Time To Dry (Ref Pic 1) 

 

5. After Prep And Dry - Insert Index Cards Or Whatever You Can Place Between Wheel / Rim And Tires To Prevent Over Spray (Ref Pic 2)

4. Start Spraying Your Plasti Dip Don't Be Afraid If You Mess Up Its Removable - Don't Be Stingy 4 - 5 Coats Recommended (Ref Pic 3)

5. Allow About 30 Mins To Dry Then Remove Your Index Cards Or Whatever Material You Used To Keep Plasti Dip Off The Tires

6. 

10. Install Wheels / Rims (19 MM Socket). Lift Car Up Remove Jack Stands Set Your Car Back On The Ground And Sit Back And Enjoy Your Hard Work (Ref pic 4)