D.I.Y. - Brad's Visor Clean Up & Painting
1. Gather Your Tools / Parts - 150 & 1500 Grit Sandpaper - Paint (Color Of Preference) - Plastic Primer - Clear Coat - 3M Double Sided Foam Tape - Rubbing Alcohol - Micro Fiber Towel
2. Sand Smooth With 150 Grit Sand Paper. Then Sand Again With Your 1500 Grit Sand Paper To Make It Really Smooth. (Ref Pic 1 & 2)
3. Once Smoothed To Your Liking Wipe Down With Rubbing Alcohol & Micro Fiber Cloth To Remove Any Debris
4. Now Use Your 3M Tape To Mount The Visor Up Right. Cut A Small Piece And Fold It Over To Raise The Visor Up A Bit
5. Once Mounted & Stable Spray Your Primer (Ref Pic 3) Let The Primer Dry For About 1 Hour Before You Start Painting.
6. Once The Primer Dries Start Laying Down Your Paint In Nice Even Coats 6 - 8 Inches Away. Lay Down 2-3 Coats Of Paint Allow 15 Mins Of Dry Time Between Coats ( Ref Pic 4-7)
7. Allow The Paint To Fully Cure Over Night. If You Start Laying Clear Coat On The Paint Not Fully Cured It Will Crackle And You Will Have To Redo It
8. These Are Pictures On A Fully Painted & Cleared Visor (Ref Pic 8-10)
9. These Are Pictures Of Brad Ferrier Visor Installed (Ref Pic 11-13)
10. Sit Back And Enjoy Your Hard Work! And Being Able To See Your Radio On A Sunny Day - Also Thanks To Brad Ferrier For Making This Piece
0 comments:
Post a Comment